Telego W715

Download and extract the firmware on your computer.: After extracting you will find the SP Flash Tool,Driver and  Install the
USB Drivers  (skip if drivers are already installed).
Open the SP Flash Tool and load the Scatter File from the firmware   folder
Connect your Smartphone to the computer using the USB Driver
 Click on Upgrade Download  Button in the SP Flash Tool to Begin the Flashing.
 Green Ring will appear at the end of successful Flash.

rom

Read More

Telego W981

1.copy ****.zip to root folder of the phone SD card

 2.Turn off the phone, then keep pressing power button and volume+ button until the robot icon appear, then press power button again

3.Press the volume- to move up and down to choose“wipe data/factory reset”, then press volume+ button to confirm.

4.Choose “yes—delete all user data”, then press volume+ button to enter the page as below.

5.It will enter below page after finishing delete all user data.

6.Then choose“apply update from sdcard”

7.Find and select the ROM, press volume+ to enter the page as below.

8.Please make sure the power is sufficient during the upgrading. It will showed as below when the upgrading finished.

9.Choose “reboot system now”,then press volume+ button to reboot your phone.
rom

Read More

Telego W410

1.copy ****.zip to root folder of the phone SD card

 2.Turn off the phone, then keep pressing power button and volume+ button until the robot icon appear, then press power button again

3.Press the volume- to move up and down to choose“wipe data/factory reset”, then press volume+ button to confirm.

4.Choose “yes—delete all user data”, then press volume+ button to enter the page as below.

5.It will enter below page after finishing delete all user data.

6.Then choose“apply update from sdcard”

7.Find and select the ROM, press volume+ to enter the page as below.

8.Please make sure the power is sufficient during the upgrading. It will showed as below when the upgrading finished.

9.Choose “reboot system now”,then press volume+ button to reboot your phone.
rom downloaded 

Read More

telego-w400

ROM Install :
Install with SP MDT:
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the MT6580_Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
 remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
rom 

Read More