OPPO R1

Step 1: Download and extract the stock firmware on your computer.

Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.

Step 3: Install the USB Drivers (skip if drivers are already installed)

Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder. 

Step 5: Connect your Smartphone to the computer using the USB Driver.

Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing. 

Step 7: Green Ring will appear at the end of successful Flash.

Download

Read More

OPPO Find 5 mini

Step 1: Download and extract the stock firmware on your computer.

Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.

Step 3: Install the USB Drivers (skip if drivers are already installed)

Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder. 

Step 5: Connect your Smartphone to the computer using the USB Driver.

Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing. 

Step 7: Green Ring will appear at the end of successful Flash.

Download

Read More

OPPO Neo 5

Step 1: Download and extract the stock firmware on your computer.

Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.

Step 3: Install the USB Drivers (skip if drivers are already installed)

Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder. 

Step 5: Connect your Smartphone to the computer using the USB Driver.

Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing. 

Step 7: Green Ring will appear at the end of successful Flash.

Download

Read More

OPPO Mirror 3

Step 1: Download and extract the stock firmware on your computer.

Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.

Step 3: Install the USB Drivers (skip if drivers are already installed)

Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder. 

Step 5: Connect your Smartphone to the computer using the USB Driver.

Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing. 

Step 7: Green Ring will appear at the end of successful Flash.

Download

Read More

OPPO N1 mini

How to Flash

Step 1: Download and extract the stock firmware on your computer.

Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.

Step 3: Install the USB Drivers (skip if drivers are already installed)

Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder. 

Step 5: Connect your Smartphone to the computer using the USB Driver.

Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing. 

Step 7: Green Ring will appear at the end of successful Flash.

Download

Read More

OPPO N1

How to Flash

Step 1: Download and extract the stock firmware on your computer.

Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.

Step 3: Install the USB Drivers (skip if drivers are already installed)

Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder. 

Step 5: Connect your Smartphone to the computer using the USB Driver.

Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing. 

Step 7: Green Ring will appear at the end of successful Flash.

Download

Read More

OPPO Find 7 a

How to Flash

Step 1: Download and extract the stock firmware on your computer.

Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.

Step 3: Install the USB Drivers (skip if drivers are already installed)

Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder. 

Step 5: Connect your Smartphone to the computer using the USB Driver.

Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing. 

Step 7: Green Ring will appear at the end of successful Flash.

Download

Read More

OPPO Find 7 Unduh ColorOS Versi Terbaru

How to Flash

Step 1: Download and extract the stock firmware on your computer.

Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.

Step 3: Install the USB Drivers (skip if drivers are already installed)

Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder. 

Step 5: Connect your Smartphone to the computer using the USB Driver.

Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing. 

Step 7: Green Ring will appear at the end of successful Flash.

Download

Read More

OPPO R5 Unduh ColorOS Versi Terbaru

How to Flash

Step 1: Download and extract the stock firmware on your computer.

Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.

Step 3: Install the USB Drivers (skip if drivers are already installed)

Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder. 

Step 5: Connect your Smartphone to the computer using the USB Driver.

Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing. 

Step 7: Green Ring will appear at the end of successful Flash.

Download

Read More

oppo N3

How to Flash

Step 1: Download and extract the stock firmware on your computer.

Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.

Step 3: Install the USB Drivers (skip if drivers are already installed)

Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder. 

Step 5: Connect your Smartphone to the computer using the USB Driver.

Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing. 

Step 7: Green Ring will appear at the end of successful Flash.

Download

Read More

hiya X1

ROM Install :
Install with SP MDT:
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the MT6580_Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
 remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
ROM DOWNLOADE
 

Read More

Telego W981

1.copy ****.zip to root folder of the phone SD card

 2.Turn off the phone, then keep pressing power button and volume+ button until the robot icon appear, then press power button again

3.Press the volume- to move up and down to choose“wipe data/factory reset”, then press volume+ button to confirm.

4.Choose “yes—delete all user data”, then press volume+ button to enter the page as below.

5.It will enter below page after finishing delete all user data.

6.Then choose“apply update from sdcard”

7.Find and select the ROM, press volume+ to enter the page as below.

8.Please make sure the power is sufficient during the upgrading. It will showed as below when the upgrading finished.

9.Choose “reboot system now”,then press volume+ button to reboot your phone.
rom

Read More

Telego W410

1.copy ****.zip to root folder of the phone SD card

 2.Turn off the phone, then keep pressing power button and volume+ button until the robot icon appear, then press power button again

3.Press the volume- to move up and down to choose“wipe data/factory reset”, then press volume+ button to confirm.

4.Choose “yes—delete all user data”, then press volume+ button to enter the page as below.

5.It will enter below page after finishing delete all user data.

6.Then choose“apply update from sdcard”

7.Find and select the ROM, press volume+ to enter the page as below.

8.Please make sure the power is sufficient during the upgrading. It will showed as below when the upgrading finished.

9.Choose “reboot system now”,then press volume+ button to reboot your phone.
rom downloaded 

Read More

telego-w400

ROM Install :
Install with SP MDT:
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the MT6580_Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
 remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
rom 

Read More

Timi T11

DESCRIPTION

ROM Mobile Timi T11 - ROM Android 4.4.2
ONLY MT6572
Official ROM Timi T11 version:  a20e_ax_tianmao_i7_home_timi_v1.01_28052015 – KOT49H
Gapps include – No Rooted
Language support : th_TH en_US lo_LA my_MM km_KH ar_IL zh_CN zh_TW nl_NL en_GB fr_FR de_DE de_AT it_IT
pt_BR pt_PT es_ES es_US bn_BD bn_IN hr_HR cs_CZ da_DK el_GR iw_IL hi_IN hu_HU in_ID ko_KR ms_MY
fa_IR pl_PL ro_RO ru_RU sr_RS sv_SE tr_TR ur_PK vi_VN ca_ES lv_LV lt_LT nb_NO sk_SK
sl_SI bg_BG uk_UA tl_PH fi_FI et_EE hy_AM kk_KZ ar_EG

Install ROM:
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6572_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
   –> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.
- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
Timi T11 n   rom

Read More

Camfone K6

Camfone K6
 

ROM Install :
Install with SP MDT:
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the MT6580_Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
 remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
Camfone K6


Download Link   >>>>>>    Mediafire

Read More

Camfone C206 +C207

Camfone C206
 

ROM Install :
Install with SP MDT:
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the MT6580_Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
 remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
 
Camfone C206

Download Link   >>>>>>    Mediafire

Camfone C207
Download Link   >>>>>>   Mediafire

Read More

Camfone C204

Camfone C204
 

ROM Install :
Install with SP MDT:
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the MT6580_Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
 remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
Download Link   >>>>>>    Mediafire

Read More

Camfone C500

Camfone C500
 
 

ROM Install :
Install with SP MDT:
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the MT6580_Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
 remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
Download Link   >>>>>>    Mediafire
 

Read More

Camfone C300

Camfone C300
 

ROM Install :
Install with SP MDT:
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the MT6580_Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
 remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
Download Link   >>>>>>   Mediafire 

Read More

Camfone C7

Camfone C7
 

ROM Install :
Install with SP MDT:
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the MT6580_Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
 remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
Download Link   >>>>>>   Mediafire 

Read More